At the moment I am building a Wharram Hitia 14. I will post links to videos here:
Building A Wharram Hitia 14 in Bangkok, Thailand Ep.60
Building A Wharram Hitia 14 in Bangkok, Thailand Ep.59
Building A Wharram Hitia 14 in Bangkok, Thailand Ep.58
Building A Wharram Hitia 14 in Bangkok, Thailand Ep.57
Building A Wharram Hitia 14 in Bangkok, Thailand Ep.56
Building a Wharram Hitia 14 in Bangkok, Thailand Ep.55
Putting fiberglass on one side of the hull – Wharram Hitia 14
Sanding and put one layer of epoxy on hull – Wharram Hitia 14
Filling grooves and sanding – Wharram Hitia 14
Filling keel grooves – Wharram Hitia 14
Fill stem and stern grooves – Wharram Hitia 14
Rounding edges – Wharram Hitia 14
Making fillets for deck supports – Wharram Hitia 14
Removing excess of deck panels – Wharram Hitia 14
Making the fillet for the flat hatch deck panel – Wharram Hitia 14
Working on fitting the curved deck panel – Wharram Hitia 14
Adding the deck panel stiffeners – Wharram Hitia 14
Epoxy and nail the fore and aft deck panels in place – Wharram Hitia 14
Plane corner off ply hullsides to fit the fore and aft deck – Wharram Hitia 14
Making fillets better & apply epoxy coat on the inside hull panels & bulkheads – Wharram Hitia 14
Unboxing sails, running & standing rigging & deck hw from Rolly Tasker Sails – Wharram Hitia 14
Removing sanding dust and fixing aft deck stringer – Wharram Hitia 14
Sanding, drilling vent holes and epoxy the deck stringer in place – Wharram Hitia 14
Fore deck panel work and removing another wrongly placed deck support – Wharram Hitia 14
Start of fitting the fore and aft deck on hull 1 – Wharram Hitia 14
Making the bulkhead fillets – Wharram Hitia 14
Finish making the fillets on the keel, sternpost and stempost of hull 1 – Wharram Hitia 14
Making the keel fillet between bulkhead 4 and 3 – Wharram Hitia 14
Start of making the fillets – Wharram Hitia 14
Stitching bulkhead 1 and 4 in place – Wharram Hitia 14
Stitching bulkhead 3 and 2 in place – Wharram Hitia 14
Bulkhead work and making fillets on the stands – Wharram Hitia 14
More work on the bulkheads and making the first stand for one hull – Wharram Hitia 14
Glueing stiffeners & deck supports again, but now on the correct side 🙂 – Wharram Hitia 14
Stitching the side panels of the second hull together – Wharram Hitia 14
Glue the stiffeners and deck supports to the bulkheads – Wharram Hitia 14
Making deck support and stiffeners for the bulkheads – Wharram Hitia 14
Stitching the stempost and keel to the side panels – Wharram Hitia 14
Drilling holes for stitching the side panels together – Wharram Hitia 14
Attaching sheer stringers to other side panels – Wharram Hitia 14
More work on the hull side panels – Wharram Hitia 14
Fixing the sheer stringer to the side panels – Wharram Hitia 14
Glueing scarf joints for sheer stringers – Wharram Hitia 14
Drawing scarf joints for sheer stringers – Wharram Hitia 14
 The bow and stern panels are joined with a butt block – Wharram Hitia 14
Planing wood and drawing bulkhead positions on stern & bow panel – Wharram Hita 14
Testing to stitch plywood together with copper wire – Building Wharram Hitia 14
Early evening epoxy work – Wharram Hitia 14
Epoxy on the inner faces of deck & side panels & one face of bulkheads – Wharram Hitia 14
Laying down plywood sheets to protect the floor – Wharram Hitia 14
Cutting and sanding details in mid platforms and tongue stiffeners – Wharram Hitia 14
Cutting, sanding, drawing and unpacking the epoxy delivery – Wharram Hitia 14
Using the cut parts to draw a second set – Wharram Hitia 14
Cutting and sanding parts cut out 12mm marine grade plywood – Wharram Hitia 14
Cutting more plywood parts with the jigsaw – Wharram Hitia 14
Cutting plywood parts with the jigsaw – Wharram Hitia 14
Another day of drawing on the marine grade plywood – Wharram Hitia 14
Checking wood delivery and drawing on the 4mm plywood – Wharram Hitia 14